產品用途

　　用于清理印花后圓（鎳）網坯表面高溫固化的感光膠，使網坯達到重復使用的標準。

主要特點

　　穩定性高：系統采用德國的增壓發生器系統，出水量平穩，壓力穩定，可對80-100目鎳網的穿透率達到99.9%。

　　成本低：主電機采用德國西門子，主電器元件采用德國施耐德，節能達到50%。

　　效率高：與安裝進口蓄能器和高壓管路，為設備連續運轉提供了保障。免拆燜頭，節省勞動力，一鍵操作。

　　清潔環保：純水清洗，不使用任何化學藥劑，無染對人體和環境不會造成任何危害。

　　收效顯著：每只圓鎳網可以使用多次，每次再生利用費用（人工+消耗）約28元左右，為廠家降低了大量的圓鎳網采購費用，節能、環保、增效顯著。

UNT-YWCJ-A

年份：2009-2013

特點：人工藥水卸燜頭，發生器和清洗機兩體

　　　占用空間大、隱患多、故障率高、穿孔率低，無法保障連續生產

備注:已逐步退出市場

UNT-YWCJ-B

年份：2014-2015

特點：一體機、占地小、全自動帶燜頭一次清洗完成，透孔率高，能連續生產不停機，屬于市場實用型。

備注:市場應用普遍型

UNT-YWCJ-C

年份：2016

特點：屬于B型升級版，全自動、高配置、一鍵操作、全自動預警、生產效率高，透孔率99.9%。

技術參數

服務體系

●免費提供售前咨詢、售后培訓服務。

●使用廠家可選派2—3名工作人員到我公司接收系統化培訓，學會為止。

●設備安裝時我公司會派***工程技術人員到場指導安裝、調試，現場指導操作人員使用，維護、保養等注意事項。

●建立微信聯系群，操作人員、機修維護人員與我公司技術工程師利用微信視頻、圖片，24小時提供疑難咨詢并指導生產。

●貴公司提出服務申請后，我公司兩小時內提供電話指導解決，或省內12小時省外24小時內派人上門解決。

●本系統保修一年(人為損壞除外)，保修期外的維修，收取成本費的原則。

Product use

It is used to clean the photosensitive glue which is solidified on the surface of the printed circular (nickel) net billet, so that the net billet can be reused.

main features

High stability: the system adopts the most advanced turbocharger system in Germany. The output of the system is stable and the pressure is stable, and the penetration rate of 80-100 mesh nickel net can reach 99.9%.

Low cost: the main motor uses German SIEMENS, the main electrical components of Germany Schneider, energy saving to 50%.

High efficiency: the installation of the imported accumulator and high pressure pipeline to ensure the continuous operation of the equipment. Free and stew head, save labor, one key operation.

High safety: the valve blocks, pipeline blocks and high pressure pipes connected by equipment are imported from the United States, and integrated with mature technology, which occupy less space and ensure safety.

Clean and environmental: pure water cleaning, do not use any chemical agents, non-toxic and non - toxic to the human body and the environment will not cause any harm.

The effect is remarkable: every round nickel net can be used many times, and the cost of recycling and utilization is about 28 yuan per time, which has reduced a lot of round nickel net purchase cost for the manufacturers, and has notable energy saving, environmental protection and synergistic effect.

UNT-YWCJ-A

Year: 2009-2013

Features: the two body of the artificial water and the stew head, the generator and the cleaning machine

It is unable to ensure continuous production by occupying large space, many hidden dangers, high failure rate and low perforation rate.

Note: the market has been gradually withdrawn from the market

UNT-YWCJ-B

Year: 2014-2015

Features: integrated machine, small footprint, high safety, automatic cleaning with head cleaning, high perforation rate, continuous production and no shutting down. It belongs to the market practical type.

Note: Universal market application

UNT-YWCJ-C

Year: 2016

Features: B type upgrade version, full automatic, high configuration, one key operation, full automatic safety early warning, full production efficiency, penetration rate of 99.9%.

Note: the first choice of high-end customers at home and abroad

technical parameter

Service system

Provide free pre sale consultation and after-sale training service.

Manufacturers can select 2 - 3 staff to receive systematic training to our company and learn to learn.

When the equipment is installed, our company will send professional engineers and technicians to the site for guidance, installation, commissioning, on-site guidance for operators to use, maintenance, maintenance, safety and other matters needing attention.

To establish WeChat contact group, operators, maintenance technicians and our company's technical engineers, using WeChat video and pictures, provide 24 hours of difficult consultation and guide safety production.

After your application, our company provides telephone guidance within two hours, or 12 hours in the province for 24 hours outside the province to send people to solve them.

This system - one year warranty (except for man-made damage), the warranty period of maintenance, charge a cost principle.